Rear Cover; Top Cover - Muratec F-110 Field Engineering Manual

3-13 Rear cover

1. Remove two screws.
2. Push the metal clip on the parallel port down and
remove the rear cover from the main frame.

3-14 Top cover

1. Before you remove the ADF roller, you should
remove:
– OPE cover (see page 3-3)
– Rear cover (see above)
2. Remove two screws securing the top cover from the
back side of the machine.
3. Remove two screws and slide the left and right paper
guides fully inward. Then spread the bottom of the top
cover and lift the cover to remove.
Paper guides
Disassembly and Reassembly
3-9