Post-Connection Check; Integration Into A Profibus Network; Overview Of The Device Database Files (Gsd); Set Device Address - Endress+Hauser Levelflex FMP51 Operating Instructions Manual

Levelflex FMP51, FMP52, FMP54
7.5

Post-connection check

Are cables or the device undamaged (visual inspection)?
Do the cables comply with the requirements?
Do the cables have adequate strain relief?
Are all cable glands installed, firmly tightened and correctly sealed?
Does the supply voltage match the specifications on the transmitter nameplate?
Is the terminal assignment correct (® ä 31) ?
If required: Is the protective earth connected correctly ?
If supply voltage is present: Is the device ready for operation and do values appear on the display module?
Are all housing covers installed and firmly tightened?
Is the securing clamp tightened correctly?
8

Integration into a PROFIBUS network

8.1

Overview of the device database files (GSD)

Manufacturer ID
Ident number
Profile version
GSD file
GSD file version
8.2

Set device address

å 7 Address switches in terminal compartment
Endress+Hauser
17 (0x11)
0x1558
3.02
Information and files under:
• www.endress.com
• www.profibus.org
Integration into a PROFIBUS network
A0015686
37