Endress+Hauser Levelflex FMP51 Operating Instructions Manual page 42

Commissioning
9.2.2 Submenus and user roles
The submenus are designed for different user roles. A user role is defined by typical tasks within
the lifecycle of the device.
User role Typical tasks
Operator Tasks in the ongoing process:
• Configuration of the display.
• Reading measuring values.
Maintenance Commissioning:
• Configuration of the measurement.
• Configuration of the measured value processing
(scaling, linearization, limit detection etc.).
• Configuration of the measured value output (analog
and digital communication interface).
Error handling
Expert Tasks which require detailed knowledge about the
instrument:
• Commissioning of measurements under demanding
conditions.
• Optimization of the measurement under demanding
conditions.
• Detailed configuration of the communication
interface.
• Error diagnosis in diffcult cases.
42
Levelflex FMP51, FMP52, FMP54
Submenu
"Language"
Defines the operating language (® ä 45).
"Display/Operation"
Contains all parameters which are needed
during the ongoing process: configuration of the
display (display values, display format, display
contrast ...).
"Setup"
Contains all commissioning parameters .
"Diagnostics"
Contains all parameters needed to detect an
analyze operational errors.
"Expert"
Endress+Hauser