Advertisement
7.1
Utility Commands
7.1.8 Loading the Saved Data to the VPS (LOAD)
Used to restore the saved data to the VPS in case of disk crash or accidental era-
sure.
The LOAD command can be executed for each data file. It may take some time to
complete LOAD for all the data.
When performing this operation, please wait until the process completion indica-
tion appears.
1
Type "LOAD", then press [RETURN].
$ LOAD
Disk Data Load (PC → VPS : Xmodem)
1: Program
2: Parameters
3: System Prompts
4: User Prompts–1
5: User Prompts–2
6: Custom Service Menu
7: Personal Greeting
8: Company Greeting
Select No.:
2
Select the item to be restored to the hard disk, then press [RETURN].
To start press 'RETURN'
3
Press [RETURN].
Start - - - - - Load !!
4
Set the data terminal to the sending (Call) mode (Xmodem). Then enter the back-
up filename.
The backup data will be restored to the hard disk.
Notes:
• You can cancel this command by pressing '\' before entering the
receiving mode, and by using the cancel command in the commu-
nication software.
• The data terminal used must be equipped with communications
software that supports the Xmodem file transfer protocol.
7-9
Maintenance
Advertisement
Chapters
