Listening To Compact Discs.14; Loading And Checking Cds.14 - Panasonic SC-AK27 Operating Instructions Manual

Listening to compact discs
Loading and checking CDs
Always stop the changer before loading or changing CDs. You cannot
change CDs while a disc is playing.
How fro load CDs
EJj Press [CD].
The power will come on automatically.
E] Press
[±
OPEN/CLOSE 1] -
[±
OPEN/CLOSE 5],
" whichever you want.
The tray will open.
PI Set CD in the tray.
Note the lighted disc indicator(see below) for the
disc you are at, and press its corresponding button
[±
OPEN/CLOSE 1] -
[±
OPEN/CLOSE 5].
The tray will close and the disc No., number of tracks and total
playing time will be shown on the display.
To load several CDs consecutively or to check which discs are
loaded
Press [± OPEN/CLOSE 1] - [± OPEN/CLOSE 5], whichever you
want.
The tray will open.
Press another of [± OPEN/CLOSE 1] - [± OPEN/CLOSE 5] to
continue loading or checking another disc. After loading or checking
all the CDs you want, press [± OPEN/CLOSE 1]-[± OPEN/CLOSE
5], corresponding to the disc you are at.
The tray will close.
Disc indicators ([DISC 1] - [DISC 5])
Disc indicators will act as follows whether the tray is loaded or not.
Green When selected (When in the playing position)
SilliSfl
In all other cases
To prevent damage
Always observe the following points:
• Load only 1 CD on the tray. Q
• Load CDs as shown in figure Q.
The adapter is not needed with 8 cm CDs (singles).
• Set the system on a flat, level surface.
Do not set it on top of magazines, inclined surfaces, etc.
• Do not move the system while tray is opening/closing, or when
loaded.
Always unload all CDs before moving the system.
• Do not put anything except CD in tray.
• Do not use cleaning CDs or CDs which are badly warped or cracked.
• Do not use CDs with poorly attached labels or stickers.
Adhesive protruding from underneath stickers or left over from peeled
off stickers can cause your stereo to malfunction.
• Do not use irregular shape CDs.
B
• Do not disconnect the power cord from the household AC outlet
during disc changing operation.