Setting Notification By Calling - Panasonic KX-TVP200BX Service Manual

Setting Notification by Calling

Subscriber's
Main Command Menu
1 2 3 4 5
6
Other
Features
1 2
Message
Interview
Waiting
M.B.
Notification
Management
Setting
2
1
Change
Change
Device
M.W.
Status
Lamp
Status
Device No.
1 2
Schedule Continuously Do not use
The VPS calls the preset telephone or beeper when a
new message is recorded in your mailbox. Set the fol-
lowing three parameters as appropriate.
*
The VPS can notify your beeper with the callback
number of the party who left the message. For this
feature to work, the telephone number stored on the
VPS for your beeper must include the beeper display
3
command.
External
Message
Setting Device Status
Delivery
For each device, the notification is enabled, disabled
or enabled on the preset schedule.
3
Assign
If you want to enable it on the schedule, contact your
Tel. No.
System Administrator as you are not allowed to set
the schedule by yourself.
1-3
Same as the Message Waiting Lamp Status.
3
4
Press
5
Enter the device number.
6
Press
Step 6 —
1
Schedule (enabled on the schedule)
2
Continuously (enabled whole day)
Do not use (disabled whole day)
3
2
to set the device status.
1
– 3 to select the status.
Tip
5-14