Advertisement
6.4
Setting up Message Waiting
Notification
6.4.1 Setting Message Waiting Lamp Status
Message Manager's
Main Command Menu
1
2
3
4
5
Setting
M.W.N.
1
2
Change
Change
M.W.Lamp
Way of
Status
Notification
Go to
Step 4
6.4.2 Setting Notification by Calling Status
6.4.2.1 Setting Device Status
You can have the VPS notify that unplayed messages are
waiting in your mailbox. You do not need to regularly
check your mailbox.
This feature has been authorized at the factory.
Two types of message waiting notification are available: no-
tification by message waiting lamp and notification by call-
ing. They can be enabled or disabled respectively.
The VPS illuminates the message waiting lamp on your tele-
phone when a new message is recorded in your mailbox.
1
Log in the main command menu.
2
Press
2
3
Press
1
Status.
4
Press
1
status, or
3
Assign
Tel No.
The VPS calls the preset telephone or beeper when a new
message is recorded in your mailbox. Set the following
three parameters as appropriate.
For each device, the notification is enabled, disabled or en-
abled on the preset schedule.
If you want to enable it on the schedule, contact your Sys-
tem Administrator as you are not allowed to set the schedule
yourself.
to set Message Waiting Notification.
to change the Message Waiting Lamp Notification
to change the Message Waiting Lamp Notification
to accept it.
2
6-7
Message Manager
Advertisement
Chapters
