Advertisement
f) External Stations ONLY (trunks)
Is CALLED party information (inband DTMF signaling)
passed?
Is CALLING party information (inband DTMF signaling)
passed?
Can the Switch provide Message Waiting Notification from
a Single Line set?
a) Turn ON any Message Waiting Indicator?
What is the "ON" sequence? _______________________________
b) Turn OFF any Message Waiting Indicator?
What is the "OFF" sequence? ______________________________
Type of Message Waiting Notification provided
a) Message Waiting Indication via (Digital Display)
b) Message Waiting Indication via (Lamp)
c) Message Waiting Indication via (Stutter dial tone)
When a station calls another (single line) station (station to station)
a) is CALLING party information (inband DTMF signaling) passed? YES / NO
b) is "speed dialing" supported by this switch?
c) can it be programmed to provide CALLING party into via
DTMF signaling?
If far end disconnect signaling supported?
a) Can the Switch provide "open loop current" when the far
end disconnects?
b) Can the Switch provide "silence" when the far end disconnects? YES / NO
c) Can the Switch provide a "constant tone" when the far
end disconnects?
(i.e. dial-tone or equivalent ... a minimum of 10 seconds is required)
d) Can the Switch provide a DTMF sequence when the far
end disconnects?
if so, what is the sequence? ________________________________
W-0-4
YES / NO
YES / NO
YES / NO
YES / NO
YES / NO
YES / NO
YES / NO
YES / NO
YES / NO
YES / NO
YES / NO
YES / NO
YES / NO
YES / NO
YES / NO
YES / NO
Worksheets
Advertisement
Chapters
