Listening To Compact Discs.12; Loading And Checking Cds.12 - Panasonic SC-AK20 Operating Instructions Manual

Listening to compact discs
loading and checking CDs
Always stop the changer before loading or changing CDs. You cannot
change CDs while a disc is playing.
How fo load CDs
Press DISC 1-DISC 5, whichever you want to open.
PI Press ^ OPEN/CLOSE.
PI Set CD in the tray. □
Press
±
OPEN/CLOSE.
The tray will close and the disc No., track No. and total playing
time will be shown on the display.
To load several CDs consecutively
Press OPEN -NEXT/-AUTO.
Every time you press the button, the next tray will open. After
loading all the CDs you want, press A OPEN/CLOSE and close the
trays.
How to check which frays have discs
Hold down OPEN -NEXT/-AUTO.
All trays will open and close automatically, in order, one at a time.
Do not try loading or changing CDs while the trays are opening and
closing.
Disc indicators (DISC KDISC 5)
Disc indicators turn the below colors whether the said tray is loaded
or not.
Green When selected (When in the playing position)
Orange In all other cases
To prevent damage
Always observe the following points.
12
• Load only 1 CD per tray. Q
• Load CDs as shown in figure Q.
The adapter is not needed with 8 cm CDs (singles).
• Set the system on a flat, level surface.
Do not set it on top of magazines, inclined surfaces, etc.
• Do not move the system while trays are opening/closing, or when
loaded.
Always unload all CDs and set the system "shipping mode" (back
cover) before moving the system.
• Do not put anything except CDs in trays.
• Do not use cleaning CDs or CDs which are badly warped or
cracked.
• Do not use CDs with poorly attached labels or stickers.
Adhesive protruding from underneath stickers or left over from
peeled off stickers can cause your stereo to malfunction.