Advertisement
4.1
System Administrator's Function
4.
System Reset/Clear
If you need to reprogram the system, see Initializing the System in Chapter 7.
5.
Quick Setup
If you are programming the system for the first time, we recommend you to employ
the Quick Setup first.
It provides you with a quick way of mailbox creation, incoming call service
assignment for all ports, time setting and so on. See page 4-8.
Especially, if you have a Panasonic KX-TD series telephone system with D-PITS
Voice Mail Integration, the Quick Setup will be completed at the same time you
start up the system (see page 4-6). Make sure the following conditions are
satisfied:
• The rotary switch is set to '2' or '3' before turning on the power switch of the
system. See page 2-6.
• The VPS is connected to extension port of your PBX. See page 2-12.
The port has to be assigned as Voice Mail port beforehand.
When prompted by instructions on the programming screen, set the rotary switch
to '0'.
System Administrator
4-3
Advertisement
Chapters
