Advertisement
4.3
Startup System
Status of the
Power Indicator
Note:
4-6
System Administrator
To start the VPS operation, system installation and line
connections must be done beforehand. See Chapter 2.
1
Turn on the POWER switch of the VPS.
2
System Setup is started and the display shows:
CARD TEST . . .
SYSTEM SETUP . . .
1. .
3
When System Setup is completed successfully, the display
shows:
(In D-PITS Integration mode)
Active COs : 1 2 3 4 5 6 7 8 9 10 11 12
DPITS Interface Connection is Established
** ON LINE MODE **
>
(In non-D-PITS Integration mode)
Active COs : 1 2 5 6 9 10
** ON LINE MODE **
>
If System Setup is not completed successfully
(In D-PITS Integration mode)
Active COs : 1 2 3 4 5 6 7 8 9 10 11 12
DPITS Interface Connection is not Established
** OFF LINE MODE **
>
"Active COs" in the above screens means "Active Ports".
–15–
2. .
3. .
Advertisement
Chapters
