Advertisement
4.5.5 System Parameter Settings
System Administration Top Menu → 1 → 5 → 6 → 7
Program – System Parameter – Others – Intercom Paging Parameter Menu
Value Range
Parameter
(default)
Intercom
Up to 12 digits
Paging
consisting of
Sequence
0–9,
special codes
(None)
Release for
Up to 12 digits
Intercom
consisting of
Paging
0–9,
special codes
(None)
No-answer
1–30 sec
Time for
Intercom
Paging
4-72
System Administrator
Intercom Paging Sequence --------------------------------------- : . . . . . . . . . . .
Release for Intercom Paging ------------------------------------- : . . . . . . . . . . .
No-answer Time for Intercom Paging (1-30 sec) --------- : 5
Announcement Repeat Cycle (1-3 times) -------------------- : 1
Intercom Paging Retry (1-10 times) --------------------------- : 2
Paging Code for Group 1 ----------------------------------------- : . . . . . . . . . . .
Paging Code for Group 2 ----------------------------------------- : . . . . . . . . . . .
Paging Code for Group 3 ----------------------------------------- : . . . . . . . . . . .
Paging Code for Group 4 ----------------------------------------- : . . . . . . . . . . .
Paging Code for Group 5 ----------------------------------------- : . . . . . . . . . . .
Paging Code for Group 6 ----------------------------------------- : . . . . . . . . . . .
Paging Code for Group 7 ----------------------------------------- : . . . . . . . . . . .
Paging Code for Group 8 ----------------------------------------- : . . . . . . . . . . .
Specifies the intercom paging sequence required by
your PBX.
, # and
Use up to 12 of the following eight letters and
twelve dial codes.
D : Disconnecting
F : Hook Flash
R : Ring Back Tone Detection
S : Silence Detection
T : Dial Tone Detection
W: Wait for 1 second
X : Pager Dialing
A : Answer
1–9, 0,
Specifies the intercom paging release code required
by your PBX. Up to 12 alphanumeric characters
, # and
can be set using the same letters and dial codes as
the Intercom Paging sequence.
Specifies the length of time in seconds that the
(5)
VPS should wait before terminating the Intercom
Paging because there is no answer.
The VPS goes back to the caller if the paged party
does not respond before this timer expires.
Description/Function
, # : Dial Codes
Reference
Incomplete
Call
Handling
Service
p.3-29
Intercom
Paging
P.3-30
Advertisement
Chapters
