Advertisement
4.5.1 Setting up Mailboxes
Value Range
Parameter
(default)
Type
1. Telephone
2. Beeper
(Telephone)
Use Device
1. Not Use
2. Continuously
3. Scheduled
(Continuously)
Note:
The Subscriber can
telephone.
0–4 times
Number of
Retries
Busy Delay
2–120 min.
No Answer
2–120 min.
Delay
Time frame 1,2
1–12: hour
MON :
00–59: minute
TUE :
AM/PM: a.m./p.m.
WED :
: All Day
THU :
Space: No Use
FRI :
SAT :
SUN :
Device 2, 3
4-24
System Administrator
Specifies the device to be notified.
Specifies the usage of Device 1.
1. Not Use
Device 1 is deactivated.
2. Continuously
Device 1 is always active and receives
notification calls whenever a message is
recorded in the mailbox.
3. Scheduled
Device 1 is active during the scheduled
time.
also specify the above three parameters using a
Specifies the number of times that a notification
(0)
call to Device 1 should be attempted after a
busy or no answer condition.
Specifies the length of time in minutes the VPS
is to wait after a busy condition before trying to
(3)
make a notification call to Device 1 again.
Specifies the length of time in minutes the VPS
is to wait after a no answer condition before
(30)
trying to make a notification call to Device 1
again.
Specifies a weekly schedule for Message
Waiting Notification.
[Note]
This parameter is valid only when "Use Device"
is set to "Scheduled".
Same as Device 1
Description/Function
Reference
M.W.N.-
Device
p.3-38
Advertisement
Chapters
