Advertisement
4.5.6 Hardware Settings
Value Range
Parameter
(default)
Operator Transfer
Sequence
Extension
Transfer Sequence
Alternate
Extension
Transfer Sequence
Reconnect
Sequence on Busy
Reconnect
Sequence on No-
answer
Reconnect
Sequence on
Refuse Call
Light-On
Sequence for
Message Waiting
Lamp
Light-Off
Sequence for
Message Waiting
Lamp
Call Waiting
Sequence
Release Sequence
for Call Waiting
4-82
System Administrator
(FX)
Used to transfer calls to the operator's extension.
(FX)
Used to transfer calls to any extension other than
the operator's.
(FX)
Used to transfer calls to the extension in Alternate
Extension Group.
(FWW)
If the extension that a caller wants is busy, this
sequence allows the VPS to reconnect with the
caller.
(FWW)
If the extension that a caller wants does not
answer, this sequence allows the VPS to reconnect
with the caller.
(FWW)
This sequence is carried out by the VPS to
retrieve the call on hold after the extension in the
Call Screening mode has refused to take the call.
(None)
This is the dialing sequence that the VPS must
perform to turn on the message waiting lamp on
an extension.
(None)
This is the dialing sequence that the VPS must
perform to turn off the message waiting lamp on
an extension.
(None)
This sequence is carried out by the VPS to
perform call waiting when the extension being
called is busy.
None
(
)
This sequence is carried out by the VPS to release
call waiting.
Description/Function
Reference
A.A.Service
p.3-4
Operator
Service
p.3-46
Call Transfer
Status
p.3-10
Alternate
Extension
Group p.3-3
Incomplete
Call
Handling
Service
p.3-29
Call Transfer
Status
p.3-10
M.W.N.-
Lamp
p.3-41
Use Call
Waiting on
Busy
p.4-29
Advertisement
Chapters
