Advertisement
2.1
System Components
The rotary switch has several functions:
– Position 0: Factory preset
– Position 1: RS-232C parameters are initialized when the system is booted up.
– Position 2*:When first installing the system, Quick Setup is automatically ex-
– Position 3*:When first installing the system, Quick Setup is automatically ex-
– Position 5: System parameters are initialized and set automatically to the factory
* When you have a Panasonic KX-TD series telephone system with D-PITS Voice Mail Integration
Notes: You must return the Rotary switch to position 0 after using positions 1, 2,
3, or 5. Otherwise, system programming, user recorded prompts, etc. may
be lost on the next power up.
The RS-232C interface can be used to connect a terminal for system pro-
gramming or a printer for printing reports.
2.1.3 Hard Disk Drive
The hard disk stores the proprietary system program, the system administration
table, the voice prompts (about 40 minutes' worth) and has the capacity to record
approximately 32 hours of messages from callers. The hard disk drive is controlled
by the central microprocessor.
2-6
Installation
Normal setting
This setting should be used if there is some uncertainty about the
parameters to be used when making connections.
Default RS-232C parameters are:
Speed
Number of data bits : 8
Number of stop bits : 1
Parity
ecuted and all ports are set up to handle callers with Automated At-
tendant service. (Please wait a minimum of two minutes for the setup
to finish.)
ecuted and all ports are set up to handle callers with Voice Mail ser-
vice. (Please wait a minimum of two minutes for the setup to finish.)
default values (see Chapter 4) when the system is booted up.
: 9600 bps
: None
MC-Service
Advertisement
Chapters
