Kodak Prostar Operator's Manual page 2

Safety
User Precautions
• Place the processor on a sturdy, level work surface capable of supporting 63.5 kg (140 lbs) and a table height between 53 cm
(21 in.) and 68 cm (27 in.).
• Make sure the electrical power outlet is located within 1.52 meters (5 feet) of the processor and is easily accessible.
• Use only the power cord(s) that was provided with the processor. Using any other power cord may cause electrical shock
and/or damage the product.
• Be sure the power cord is securely plugged into the wall outlet. Failure to do so may cause electrical shock or fire.
• Do not damage, knot, cut or modify the power cord. This may cause electrical shock or fire.
• The scanner requires a dedicated power outlet. Do not use an extension cord or power strip with the scanner.
• Do not connect the processor to an extension cord of multi-plug power strip. Use a dedicated power outlet.
• Leave sufficient space around the power outlet so it can be easily unplugged in case of an emergency.
• Do not use the processor if it becomes inordinately hot, has a strange odor, emits smoke, or makes unfamiliar noises.
Immediately stop the processor and disconnect the power cord from the power outlet. Contact Kodak Service.
• Follow the Kodak recommended maintenance and cleaning procedures.
• Material Safety Data Sheets (MSDS) are available on the Kodak website at: www.kodak.com/go/msds. When accessing the
MSDSs from the website, you will be required to provide the catalog number of the consumable you want the Material Safety
Data Sheet for. See the section entitled, "Supplies and consumables" later in this guide for supplies and catalog numbers.
• For disposal or recycling information, contact your local authorities, or in the USA, visit the Electronics Industry Alliance
website: www.eiae.org.
CAUTION: Moving parts, avoid contact.
CAUTION: Hot surface, avoid contact
Acoustic emission
Maschinenlärminformationsverordnung – 3, GSGV
Der arbeitsplatzbezogene Emissionswert beträgt <70 db(A).
[Machine Noise Information Ordinance — 3, GSGV
The operator-position noise emission value is <70 dB(A).]
EMC statements
United States: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part
15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
European Union: WARNING: This is a Class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
Japan: This is a Class A product based on the standard of the Voluntary Control Council for interference by information
Technology Equipment (VCCI). If this is used in a domestic environment, radio disturbance may arise. When such trouble
occurs, the user may be required to take corrective actions.