3.2
Guidelines for safe lifting and transportation
After operation, please observe the guidelines for temporarily decommissioning the unit (chap. 17.2).
Empty the water pan before moving the incubator. In case of any spilling of the contents, shut down the
incubator and dry it out carefully and completely
Sliding or tilting the unit.
Damage to the unit.
Risk of injury by lifting heavy loads.
Transport the unit in its original packaging only.
Secure the CO
∅ Do NOT lift or transport the unit using the door handle, the door or the lower housing.
Lift the unit at the four lower corners with the aid of 4 people and place it on a rolling
pallet.
Move the unit to the desired location and lift it from the rolling pallet with the aid of four
people.
Figure 10: Lift the unit with the aid of 4 people
• Permissible ambient temperature range for transport: -10 °C / 14°F to +60 °C / 140°F.
You can order transport packing and rolling pallets for transportation purposes from BINDER Service.
C 150 (E2) 06/2011
incubator with transport straps for transport.
2
CAUTION
Figure 11: Incorrect lifting
Figure 12: Correct lifting
page 18/78
Need help?
Do you have a question about the APT.line C 150 and is the answer not in the manual?