Retrieving The Memory Status List; Retrieving Fax Messages - Brother MFC-830 Owner's Manual

Retrieving the Memory Status List

You can retrieve the Memory Status List from a remote fax machine to see if you have any fax
messages.
1
Dial your fax machine's number.
2
When you hear the beep, immediately enter your Remote Access Code
(the factory setting is 1 5 9
3
When you hear two short beeps, use the dial pad to press 9 6 1.
4
Using the dial pad, enter the number (up to 20 digits) of the remote fax machine where you want
the Memory Status List forwarded, and then press # #.
You cannot use
press # .
5
After you hear your fax machine beep, hang up and wait.
Your fax machine calls the remote fax machine. Your fax machine then sends the Memory
Status List to the fax machine that you are calling from.

Retrieving Fax Messages

1
Dial your fax machine's number.
2
When you hear the beep, immediately enter your Remote Access Code
(the factory setting is 1 5 9
3
As soon as you hear two short beeps, use the dial pad to press 9 6 2.
4
Using the dial pad, enter the number (up to 20 digits) of the remote fax machine where you want
your fax messages forwarded, and then press # #.
You cannot use
press # .
5
After you hear your fax machine beep, hang up and wait.
Your fax machine calls the remote fax machine. The fax machine that you are calling from prints
your fax messages.
50
Chapter 9
).
and # as dial numbers. However, if you want to store a pause,
).
and # as dial numbers. However, if you want to store a pause,