Storing Speed Dial Numbers; Changing One Touch And Speed Dial Numbers - Brother FAX-2890 Basic User's Manual

c
Do one of the following:
 Enter the name using the dial pad
(up to 10 characters for Chinese or
20 characters for alphanumeric).
Use the chart on Entering text
uu page 117 to help you enter
letters.
Press OK.
 Press OK to store the number
without a name.
d
If you want to change the pinyin, you can
change it using the dial pad.
e
To store another One Touch number, go
to a.

Storing Speed Dial numbers

You can store your frequently used numbers
as Speed Dial numbers, so that when you dial
you will only have to press a few keys 
( (Address Book), the three-digit Speed
Dial number and Start). The machine can
store 200 Speed Dial numbers (001 - 200).
a
Press (Address Book) and enter a
three-digit Speed Dial location number
(001-200). If a number is not stored
there, the LCD shows Register Now?
Press 1 to choose Yes.
b
Enter the telephone or fax number (up to
20 characters).
Press OK.
c
Do one of the following:
 Enter the name using the dial pad
(up to 10 characters for Chinese or
20 characters for alphanumeric).
Use the chart on Entering text
uu page 117 to help you enter
letters.
Press OK.
 Press OK to store the number
without a name.
Dialling and storing numbers
d
If you want to change the pinyin, you can
change it using the dial pad.
e
To store another One Touch number, go
to a.
Changing One Touch and
Speed Dial numbers
If you try to change a One Touch or Speed
Dial number, the LCD will show the name or
number already stored there. If the One
Touch or Speed Dial number you are trying to
change has a scheduled job or has been set
to a fax forwarding number, the LCD will ask
you if you want to change the name or
number.
a
Do one of the following:
8
 To change a stored One Touch
number, press Menu, 2, 3, 1.
Address Book
1.One Touch Dial
Press the One Touch key you want
to change.
 To change a stored Speed Dial
number, press Menu, 2, 3, 2.
Address Book
2.Speed Dial
Enter the Speed Dial number you
want to change, then press OK.
b
Do one of the following:
 To change the stored data, press 1.
Go to step c.
 To exit without making a change,
press Stop/Exit.
#005:MIKE
1.Change 2.Clear
8
8
39