Changing Or Deleting One Touch And Speed Dial Numbers - Brother MFC-9970CDW Basic User's Manual

j
Select the resolution from 100 dpi,
200 dpi, 300 dpi or 600 dpi.
 If you chose E-Mail Color PDF,
go to step m.
If you chose E-Mail Color JPEG

or E-Mail Color XPS, go to
step n.
k
Select the resolution from 100 dpi,
200 dpi or 300 dpi.
 If you chose E-Mail Gray PDF, go
to step m.
 If you chose E-Mail Gray JPEG or
E-Mail Gray XPS, go to step n.
l
Select the resolution from 200 dpi or
200 x 100 dpi.
 If you chose E-Mail B&W PDF, go
to step m.
 If you chose E-Mail B&W TIFF, go
to step n.
m
Select the PDF type from PDF, PDF/A,
Secure PDF or Signed PDF that will
be used to send to your PC.
Note
If you choose Secure PDF, the machine
will ask you to enter a four-digit password
using numbers 0-9 before it starts
scanning.
n
Enter a three-digit Speed Dial location
number (001-300).
Press OK.
o
When the LCD displays your settings,
press OK to confirm.
p
Press Stop/Exit.
Dialling and storing numbers
Changing or Deleting One
Touch and Speed Dial
numbers
You can change or delete a One Touch or
Speed Dial number that has already been
stored.
If the stored number has a scheduled job,
such as a delayed fax or a fax forwarding
number, it will be dimmed on the LCD. You
cannot select the number to make changes or
to delete it unless you first cancel the
scheduled job. (See Checking and canceling
waiting jobs in chapter 3 of the Advanced
User's Guide.)
a
Press Address Book.
b
Press More.
c
Do one of the following:
 Press Change to edit the name,
number or E-mail address and go to
step d.
Press Delete to delete all

information in a Speed Dial or One
Touch number.
Select the number you want to delete
by pressing it to display a red check
mark.
Press OK.
When Erase This Data?
appears, press Yes to accept it.
Go to step h.
d
Press a or b to display the number you
want to change.
Press the number you want to change.
Note
One Touch Dial numbers begin with l.
Speed Dial numbers begin with #.
7
7
53