Parameter Setting - Siruba BH9820 Operation Manual

4.4 Parameter Setting

In the setting mode, press
select
"parameter setting" and press
the interface for setting U level parameters (as
shown in right picture).
Press to quit the setting interface.
Press or
parameter for changing; then press
to change
the value of the
to confirm the change.
is to change the parameter and at that time
the ground color of the parameter value will turn
white; after user presses
the change, the ground color will turn black.
Parameter under Setting
List of U Level Parameters:
No. Functions
Pedal/2 Pedals
1
U001
Switch
Delay
U051 before cut
Pedal model
or to
to enter
to select the
or
parameter and press
Pressing or
to confirm
Description
0: Analog
pedal
Step the start pedal to
1:
lower the presser, and the
sewing machine starts.
Press the presser switch
2:
to
lower the presser. Then step
For automatic
time
in
for 1
Cut-before-Sewing mode, this
parameter will determine the
Parameter after Confirmation
Range
single
0~2
sewing
0~800
27
Changing Default
Step Setting
1 2
50ms 0