Advertisement
1 Key Description
Name
Function
Parameter Edit
Setting
Parameter
Check and
Save
On the
Adjustment
Key
Under the
Adjustment
Key
Slow Launch
Setting
Needle Stop
Position
Selection
2. Operating Instructions
2.1 Restore Factory Setting
Under the shutdown state, hold on the "up" key and "down" key to boot, then double-click the S key to
confirm it, shutdown restart.
3 Parameter List
Parameters
Parameter Function
P01
Maximum speed
Needle stop position
P02
selection
P03
Soft start switch
P04
Soft start sewing speed
Stitches number of soft
P05
start
P06
Minimum speed
Key
Press this key to enter or exit function parameter edit mode.
For the content of the selected parameters check and save: after select parameter
press this key to check and modify operation, after modified parameter value press
this key to exit and save the parameter.
1. Choose the region parameter items of incrementing key
2. Parameter setting value incrementing key
1. Choose the region parameter items of diminishing key
2. Parameter setting value decrementing key
If click, set used or cancelled slow launch function.
If click, the needle stop position after shift the sewing mode ( Up position / Down
position)
Range
200-3700
200-1500
200-500
Indicate
Default
3700
0-2
1
0-1
1
400
1-15
1
200
- 2 -
Description
Set the max sewing speed.
0: Needle up 1: Needle down 2: OFF
0: OFF
1: ON
Set the minimum speed.
Advertisement
