Parameter Adjusting And Example - Siruba DL7300 Manual

●Parameter adjusting and example
1.1 The panel is four ditigal nixietube display
Adjust the speed by press the
1.2 In standby interface ,press the
is on up needle stop , when the down needle position indicator light is on , it is on down position
stop, when the indicator light is off ,the needle position function turn off.
1.3 In standby interface , press the
1.4 Enter in and change the system parameter：
①
When the power is on ,press the
it enters into the parameter mode. The nixietube shows "P-00"
②
Press the
③
After choose the parameter , press the
the value of the parameter by
④
Press the
1.4 The motor clockwise rotation and counter-clockwise rotation setting：
①
When the power is on , press the "p" key for some second
into the parameter mode, the nixietube shows "P-00"
②
Press the
③
Press the
0 means counter-clockwise rotation setting, 1 means clockwise rotation setting
④Press the
and
key ,when the up needle position indicator light is on ,it
key , can turn on/off the machine head light.
or key ,can change the parameter
or key.
key save the value
key ,change the parameter to "P-02"
key enter into the parameter, use the
key save the value .
key when in standby interface
key for some seconds ,then press the
key ,enter into the parameter ,then can change
s, then press the "+" key ,enter
and
28
key ,
to change the value.