Siruba BH9820 Operation Manual page 36

No. Functions
Lower presser
U056
when move front
Enable presser
U057
at test
Presser action
U058
after sewing
Stop at needle
U150 upper position
when suspended
U152 Final stch spd of
Description
the pedal 1 is stepped
0: OFF
After sewing, the cloth-
feeding board moves to the
position set before with the
presser at up position; the
presser keeps up during
searching origin.
1: ON
After sewing, the
presser doesn't rise
until the
cloth-feeding board moves
to the position for laying
cloth;
during the process of
searching
origin, the presser keeps
0: OFF
The raise of presser
is forbidden in test
mode
1: ON
In Test mode, the following
operations can make presser
go up:
(A): Manual switch type or
double pedal type:
press presser switch
(B): pedal type：return to
pedal
In restarting the test mode,
the following operations have
to be done for lowering the
presser (A): Manual switch
type or double pedal type:
0: Up
Presser goes up when the
automatic sewing is
finished
1: Down
Presser keeps going down
when the automatic sewing
is finished. Please perform
the following operations
when the presser rise:
(A): Manual switch type or
double pedal type: press
presser switch
OFF: At pause, the upper axis
is in the status of
emergency stop
ON: At pause, the upper
axis stop at needle upper
Set speed of the last stitch
28
Range Changing Default
Step Setting
0~1 1
0~1 1
0~1 1
0~1 1
700~90 10rpm
0
0
0
1
800