Basic Operation - Siruba BH9820 Operation Manual

2.2 Basic Operation

① Turn on Power
After user turns on the power, the system will
display the contents at below in order at the Pattern
Data Display Area:
Welcome to Using MASC511 Series
Buttonhole
Machine →MASC511-00 (01or 02) →Create Data→
Please Press Start Switch.
Note: If figure "EB012" is displayed on the
operation panel as shown in picture (A) when user
turns on the power, please turn the wheel (1) in the
directions shown in picture (B) and make the print (2)
face to the gap (3) directly.
② Press Start Switch
After user steps the right pedal for start, the
feeding board will move to the position for laying
cloth. In the operation panel, the standby status of
the previous operation mode (it might be Auto Mode,
Manual Mode, Test Mode, Cycle Mode or Program
Mode) will be displayed.
Note: The "Standby Status" is the status before the
next action when the system moves to a mode.
(A)
5
(B)