Siruba BH9820 Operation Manual page 15

No. Figure
12
13
14
15
2.3.2 Setting of Pattern Program
It is advised to preset the parameters
of pattern data frequently used so
that user would only need to select the
pattern number to enter
pattern in the future usage, which
saves the time for
parameters at each time.
20 patterns can be registered at
most, and their parameters can be
altered at any time.
When leaving the factory, pattern
numbers from P01~P20 save the
default pattern program (Patterns from
P01~P20 are all the same.)
⑧ Press
⑨ Select a pattern number from
P01~P20 (1) for changing the
content.
Pattern number (1) will change in
the following sequence: P01 → P02
→ ... P20 → C1→C2...C9, at each
pressing of (press
change the number in the contrary
order).
Functions
Cloth-tightening Permitted/
Forbidden
Front/Back
Cut-before-Sewing
Cut-after-Sewing
the set
resetting the
to
7
Remarks
The indicator light will be on if
permitted, and off if forbidden.
Shift the cloth-feeding
from
"Front" to "Back". The indicator light
will be on if set as "Front", while off if
Set as cut-before-sewing, the
indicator
light will be on; while set
as cut-after-sewing or no cut, the
Set as cut-after-sewing, the indicator
light will be on; while set
as cut-before-sewing or no cut, the
indicator light will be off.
positions