Siruba BH9820 Operation Manual page 26

⑫ Turn Hand-wheel at Upper Axis to
Left
The cloth-feeding board will move to the
sewing position of the next stitch at
each turning round of upper axis hand-wheel.
When the wheel reverses for half a cycle
(needle rod goes up and down once), the
leftover stitch number (5) at sewing data
display area will reduce 1 stitch.
Caution:
If the upper axis hand-wheel turns
reversely, the cloth-feeding board will not
move the shape with the set stitch form.
⑬ For stopping the manual sewing,
Please don't turn the wheel reversely.
press emergence stop switch (8)
when the
cloth-feeding board returns to the
position for laying cloth.
The "Pause Switch Is Pressed In Sewing"
is displayed on operation board. Press
to release the alarm and return
to sewing interface and then press
again.
18