Siruba BH9820 Operation Manual page 31

⑱ Press
Step
Number (3) to S4.
Press or
the content of S4 (6) as P03.
Press Cutter Action Key (7) to
change the "P03" at position (6) to
"P03" (Without Cutter Action).
⑲ Press
to confirm
changed content.
Press any key in (1) to end
the setting in the Cycle Mode.
Note: When selecting the cyclical
program to perform
automatic
sewing, the user can change the
cutter
action in the Auto Mode. And the cutter
action in the C pattern will be kept the
same as set in the cutter mode.
to change the
to set
the
the
23