Initialization Of Parameters - Siruba BH9820 Operation Manual

No. Functions
U913 DIP1
U913 DIP2

4.5 Initialization of Parameters

In the setting mode, press
select "parameter initialization" and press
enter the interface of U level parameter setting.
Press to quit the parameter setting interface.
After entering the parameter setting mode,
user can select:
(1) LEVEL1: Pattern And C Program (S Level
pattern parameter and C pattern cycle
program) (2) LEVEL2: Storage Data
(Including U level
parameters)
(3) LEVEL3: All Internal Data
The detailed initialization content is at below:
Level & Content of Initialization
LEVEL1
Program Default
content value
Cycle program Clear
Storage switch —
Program 1
number
Parameter 1
number
Production —
counter
Mode Program
Position for Inside
laying cloth
Cutter action OFF
② Select the parameter for initialization, then press
for confirmation.
The right interface will be displayed on the
screen, press to initialize the parameter
or press to cancel the initialization operation.
Description
Temporary adjusting
parameter
Temporary adjusting
parameter
or to
to
LEVEL2 LEVEL3
— Default
value
— Clear
Default Default
value value
— 1
— 1
— 0
— Program
— Inside
— OFF
Range
-100~1
00
-100~1
00
33
Changing Default
Step Setting
1 0
1 0