Siruba BH9820 Operation Manual page 28

3.3.2 Method for Releasing Pause
(Stopping the Work)
④ Press RESET (2) when the interface
displays "Pause
pressed
under machine
status".
Then the operation penal will return to
the sewing interface,
pattern data display area shows
"Press 'Reset' or 'Down'"
⑤ Release the error causing the pause.
⑥ Press . After the needle rod
and the cloth-feeding board
performs the
origin test, they will return to the
position for setting cloth.
3.3.3 Method for Releasing Pause
(Continuing the Work)
⑩ Press RESET (2) when the interface
displays "Pause Switch is pressed
under
machine sewing
status".
Then the operation penal will return
to the sewing interface, and the
pattern data display area shows
"Press 'Reset'
⑪ Release the error causing the pause.
or 'Down'
If the upper thread is broken,
press
⑫ Press
to enter the threading mode.
to display the total
stitch number of pattern (3) and the
leftover
stitch number (4) in the pattern data
⑬ Press
display area.
or
the cloth-feeding board according
to the
shape of pattern so as to confirm the
position for continuing the sewing job.
If the upper thread is broken,
press
to enter the threading mode.
Note: press
and to reverse. Holding means to
⑭ Select the position for continuing the
keep proceeding or reversing.
sewing, step the start pedal (5)
to
continue the automatic sewing of the
existing pattern.
Switch is
sewing
and the
to move
to proceed
20