Siruba BH9820 Operation Manual page 16

⑩ Press
The pattern data display area will
display the parameter number (2) and
the specific parameter information (3)
⑪ Press
of the previous selection.
parameter number (2).
⑫ Press
the
content of parameter (3).
The flashing parameter information
(3) means the content is uncertain.
⑬ Press
the changed content.
If the parameter information stops
flashing, that means it has been
confirmed. If user presses any key
among
, ,
instead of
flashing, the changed parameter (3) will
be abandoned and return to the
⑭ Repeat the operation from 4 to
original value.
6
to change other
parameters.
2.3.3 About Hot Keys
Among the Hot Keys, the following
6 parameters are registered for
their frequent usage:
(5) Sewing Speed (Parameter No.01)
(6) Length of Lockstitch Sewing at
Buttonhole (Parameter No.02)
(7) Cutter Interval （ Parameter
No.03）
(8) Stitch Pitch (Parameter No.04)
(9) Stitch Number at Eyelet Part
（Parameter No.05）
(10) Length of
(Parameter No.06, No.08, No.10)
Note: the different
sewing types set in parameter number
No.40 are corresponding to the various
values of bar-tacking sewing length
parameter (10).
to select the
to change
to confirm
, ,
when
Bar-tacking
bar-tacking
8
（具体参
考【 花樣