Siruba BH9820 Operation Manual page 34

displays update is complete,
turn off the power and restart the
machine to finish the update
operation.
Note: the power shall remain on
during the update process
until the update is completed
and the system hints to restart
the system.
(2) Panel Update
Step 1: first create a file folder
named "update" under the root
directory of the U disk, and
then put the panel program
"LCDpanel" under that "update"
file folder.
Step 2: before powering on, first
insert the U disk containing the
panel update program. After
that,
press the
keys ,
and on the panel at
the same time and then start
the machine. The panel will
directly enter and display
the panel update mode.
Step 3: press to
enter the update status
automatically. After the panel
displays update is complete, turn
off the the machine and power it
on again to finish the update
operation.
Note: the power shall remain
on during the update process
until the update is completed
and the
system hints to restart the
system.
26