Device Check" Submenu - Endress+Hauser Levelflex FMP53 Operating Instructions Manual

Operating menu
Start device check
Navigation
Description
Selection
Additional information
Result device check
Navigation
Description
Additional information
Last check time
Navigation
Description
User interface
194
17.4.8

"Device check" submenu

Navigation  Diagnostics → Device check
 Diagnostics → Device check → Start dev. check
Start a device check.
• No
• Yes
In the case of a lost echo a device check can not be performed.
 Diagnostics → Device check → Result dev.check
Displays the result of the device check.
Meaning of the display options
• Installation ok
Measurement possible without restrictions.
• Accuracy reduced
A measurement is possible. However, the measuring accuracy may be reduced due to the
signal amplitudes.
• Measurement capability reduced
A measurement is currently possible. Howerver, there is the risk of an echo loss. Check
the mounting position of the device and the dielectric constant of the medium.
• Check not done
No device check has been performed.
 Diagnostics → Device check → Last check time
Displays the operating time at which the last device check has been performed.
Character string comprising numbers, letters and special characters
Levelflex FMP53 FOUNDATION Fieldbus
Endress+Hauser
