Danfoss VLT HVAC Drive Instruction Manual page 15

Danfoss MCT 10 Software is a free download and can be found at DanfossDrives.com. Click on the Service and
support link, then select the Downloads link.
Next, select Drives from the list on the left side under Business unit.
Scroll down until you find the VLT Motion Control Tool MCT 10, then click the link to go to the download page.
Download the latest version of the MCT 10 Software Tool by clicking on the link in the Download column, as shown
below.
MCT 10 Setup Software Tutorial
3
1
2
4
14
5