RH850 Series
5.
CAN-related Interrupt Processing
When using interrupts, the interrupt
flag on the interrupt control side, refer to "7.1 CAN-related interrupt
source
Figure 5-1 shows how to clear the interrupt
【Note】 1.
Please carry out if necessary.
R01AN6028EJ0100 Rev.1.0
May 10, 2017
flag must be cleared to "0". For CAN-related flags related to each interrupt
source
source
Interrupt source determination
Clear the CAN-related flag that was a source to "0"
Applicable interrupt processing
Figure 5-1
CAN-related Interrupt Processing Procedure
CAN Receive Procedure (CAN FD Mode)
source
flag in interrupt processing.
START
*1.
END
s".
Page 18 of 26