5 Setup and Wiring
Precautions for Correct Use
Turning OFF the Power
When a message is displayed indicating that a task is in progress, do not turn OFF the power.
Doing so causes the data in the memory to be corrupted, resulting in the product not operating
properly upon the next start-up.
Do not turn OFF during saving data to Sensor Controller.
When turns OFF, conform the followings proceedings have completed. and then operate again.
- When saves using Sensor Controller: Confirm the save processing is completed and next op-
eration is possible.
- When saves using communication command: Intended command is completed. BUSY signal
is turned OFF.
Maintenance
Turn OFF the power and ensure the safety before maintenance.
5
5-3
FH Series Vision System Hardware Setup Manual for 3D Robot Vision (Z436-E1)