Omron FH Series Hardware Setup Manual page 80

4 Handling and Installation Environment
also required when mounting multiple Sensor Controllers side by side. For the back mount-
ing, the back-side clearance of 15 [mm] is not required.
Handling a SD memory card
• Before removing a SD memory card, make sure that data is not being read or written to them.
• For SD memory card, the SD BUSY LED flashes or lights while data is being read or written,
so make sure that it is turned OFF before removing the memory.
• Do not insert an SD memory card in the reverse orientation, at an angle, or in a twisting man-
ner.
4-4
FH Series Vision System Hardware Setup Manual for 3D Robot Vision (Z436-E1)