User Defined Programmes (U) - CARDIOSTRONG FX70 Assembly And Operating Instructions Manual

3.5.6

User defined programmes (U)

Each user has one user defined programme with eight segments available to set.
1. Choose the user defined programme (U) and confirm your choice with the encoder.
2. Set the resistance level for each segment with the encoder and confirm each segment with the
encoder (Fig. 16).
NOTICE
L
To cancel the programme while setting, press and hold the encoder for two seconds.
3. Set the training time with the encoder and confirm your entry with the encoder.
4. To start the programme, press the START/STOP-button.
NOTICE
L
The resistance level can be changed with the encoder during training.
At the end of the programme, a signal will be heard.
5. To pause the programme, press the START/STOP-button again.
6. To end the programme, press the RESET-button.
The display will change to the main menu.
Figure 16
30
FX70