Solutions - Epever UPower-HI Series User Manual

Utility frequency
Output voltage abnormal
Output short circuit
Output overload
PV over voltage

5.2 Solutions

Faults
Battery over voltage
Battery over
discharge
Battery overheating
Device overheating
Output overload
Output short circuit
abnormal
Check whether the battery voltage is too high and disconnect the PV
modules.
Waiting for the battery voltage to resume to or above LVR point (low voltage
reconnect voltage) or changing the power supply method.
When the battery temperature declines to the overheating recovery
temperature or lower, the inverter/charger will resume working.
When the device temperature declines to the overheating recovery
temperature or lower, the inverter/charger will resume working.
① Please reduce the number of AC loads.
② Restart the device to recover the load output.
① Check carefully loads connection, clear the fault.
② Restart the device to recover the load output.
Utility fast
--
flashing
Inverter fast
--
flashing
Inverter fast
--
flashing
Inverter fast
--
flashing
PV charge
--
fast flashing
Solutions
48
Alarm On Solid
Alarm On Solid
Alarm On Solid
Alarm On Solid
Alarm On Solid