GREASING THE WINDROWER (continued)
100 Hours:
1. Wheel Hub Bearings (D) - two fittings
CENTER LINK BALL JOINTS
Apply SAE 30 or equivalent lightweight oil to the
center link ball joints (A) every 50 hours.
A
OIL CENTER LINK BALL JOINTS
SPRING PIVOTS
Apply SAE 30 or equivalent lightweight oil to the
spring pivots (B) every 50 hours.
OIL SPRING PIVOTS
Form # 147008
MAINTENANCE/SERVICE
HITCH PIN LOCK NUT
Check hitch pin nut (C) every 50 hours. Maintain
350 ft. lbs. (475 N⋅m) torque.
B
44
D
WHEEL HUB BEARINGS
C
CHECK HITCH PIN LOCK NUT
Issue 12/05