Table of Contents
Advertisement
UNLOADING & ASSEMBLY
ADJUST HEADER ANGLE AND FLOAT
Mechanical Center Link – Adjust header angle by
adjusting center float link to center of slot (A).
Hydraulic Header Angle – Adjust header angle
by positioning hydraulic cylinder near center of
gauge (B).
Adjust header float. See "Header Angle" and
"Header Flotation" in Operation section for
adjustment details.
A
ADJUST LINK TO CENTER OF SLOT
B
HYDRAULIC HEADER ANGLE KIT
ADJUSTMENTS AND CHECKS
Perform the final checks and adjustments as listed on the "Pre-Delivery Checklist" (yellow sheet) to ensure the
machine is field-ready.
IMPORTANT: To avoid machine damage, check that no shipping dunnage has fallen down between auger
and pans.
Place Operator's Manual and Parts Catalog in storage case (C) provided on primary drive shield.
C
C
12' UNITS
14' & 16' UNITS
MANUAL STORAGE CASE
Form # 147008
Issue 12/05
77
Advertisement
Table of Contents
