Table of Contents
Advertisement
AUGER
Drive Type
Overload Protection
Auger Type
Auger Speed
CONDITIONER ROLLS
Drive Type
Roll Type
Roll Diameter
Roll Length
Roll Speed
WHEELS
Tread Width
Tires
Tire Pressure
MATERIAL DISCHARGE
Minimum Width
Maximum Width
Rear Fluffing Shield
OPERATING SPEED
Recommended Field Speed
Recommended Transport Speed
TRACTOR REQUIREMENTS
Minimum Power
Drawbar Capacity Must Exceed
PTO
Hydraulic Capacity
* All speeds are in no-load condition at rated tractor RPM.
(SPECIFICATIONS AND DESIGN ARE SUBJECT TO CHANGE WITHOUT NOTICE OR OBLIGATION TO
REVISE UNITS PREVIOUSLY SOLD.)
Form # 147008
SPECIFICATIONS
12 FT.
119 in. (3030 mm)
60 hp (45 kw)
1300 lbs. (5785 N)
10
14 FT.
Chain final drive
Hydraulic motor
20 in. (508 mm) diameter
variable pitch, center feed
245 RPM *
Drivelines from enclosed oil bath chain drive
Helical intermeshing steel "V" bars
8.75 in. (222 mm)
93 in. (2360 mm)
827 RPM *
143 in. (3640 mm)
31 x 13.5 - 15 NHS 8 ply Terra-Rib
30 psi (207 kPa)
30 in. (760 mm)
92 in. (2346 mm)
Adjustable
5 mph (8 km/h)
20 mph (30 km/h)
75 hp (56 kw)
1030 lbs. (4580 N)
540 or 1000 RPM - ASAE standard location
1750 psi (12000 kPa), two hydraulic circuits
16 FT.
143 in. (3640 mm)
90 hp (68 kw)
1100 lbs. (4895 N)
Issue 12/05
Advertisement
Table of Contents
