Table of Contents
Advertisement
OPTIONS & ATTACHMENTS
The following attachments and optional equipment are available from your Dealer:
ADDITIONAL SKID PLATES
WholeGoods order number: B2149
In addition to the standard two outer skid plates, two inner plates may be added for extra control of cutting
height and protection of cutting components. See "Cutting Height" in Operation section.
PTO CONVERSION KITS
Parts order number:
540 rpm PTO pump kit – 36909 (converts 1000 rpm to 540 rpm)
1000 rpm PTO pump kit – 36859 (converts 540 rpm to 1000 rpm)
Kits are for converting from 540 to 1000 RPM or vice-versa.
TALL CROP KIT
WholeGoods order number: B2539
Kit includes crop dividers and lean bar extensions.
IMPORTANT: Lean bar extensions provided in this
B
kit are not for use in this application, as they will
A
cause crop dividers to contact the swing tongue.
These extensions are for use with Self-Propelled
Windrower Auger Headers only.
Crop dividers mount to lean bar for clean crop
dividing and reel entry in tall crops. Left and right
MOST AGGRESSIVE
dividers are included in the kit.
The amount of crop "gathered" by the divider is
adjustable. For the most aggressive gathering,
B
mount the divider at the two forward holes (A) and
position the U-bolt (B) farther inboard on the lean
bar.
For the least aggressive gathering, mount the
divider at the two rearward holes (C) and position
the U-bolt (B) farther outboard on the lean bar.
Use minor adjustments of U-bolt position to
achieve best results in specific conditions.
Crop dividers should be removed for flat-bed
LEAST AGGRESSIVE
transport or for storage.
C
CROP DIVIDERS
Form # 147008
Issue 12/05
67
Advertisement
Table of Contents
