Table of Contents
Advertisement
Table 23 Network Setting > Wireless > Guest/More AP > Edit (continued)
L ABEL
Access Scenario If you select
BSSID
Security Level
Security Mode
Generate
password
automatically
Password
Encryption
Timer
Cancel
OK
7.4 MAC Authe ntic a tio n
This screen allows you to configure the WX Device to give exclusive access to specific devices
exclude specific devices from accessing the WX Device
Every Ethernet device has a unique MAC (Media Access Control) address. It is assigned at the factory
and consists of six pairs of hexadecimal characters; for example, 00:A0:C5:00:00:02. You need to know
the MAC addresses of the device(s) you want to allow/deny to configure this screen.
Note: You can have up to 25 MAC authentication rules.
Use this screen to view your WX Device's MAC filter settings and add new MAC filter rules. Click
Chapter 7 Wireless
DESC RIPT IO N
, clients can connect to each other directly.
Ho m e G ue st
If you select
, clients are blocked from connecting to each other directly.
Exte rna l G ue st
This shows the MAC address of the wireless interface on the WX Device when WiFi is enabled.
Select
Mo re Se c ure (Re c o m m e nde d)
which want to associate to this network must have the same wireless security settings as the WX
Device. After you select to use a security, additional options appears in this screen.
Or you can select
No Se c urity
encryption or authentication.
See
Section 7.2.1 on page 96
Select the security mode the WX Device uses.
Select
WPA2- PSK, WPA3- SAE
wireless clients which want to associate to this network must have same wireless security settings
as this device. Or you can select
authentication..
Select this option to have the WX Device automatically generate a password. The password
field will not be configurable when you select this option.
WPA2-PSK uses a simple common password, instead of user-specific credentials.
If you did not select
G e ne ra te pa sswo rd a uto m a tic a lly
from 8 to 64 case-sensitive keyboard characters.
Click the Eye icon to show or hide the password of your wireless network. When the Eye icon is
slashed
, you'll see the password in plain text. Otherwise, it is hidden.
Click this
to show more fields in this section. Click again to hide them.
This field shows the
type of data encryption.
AES
The
is the rate at which the RADIUS server sends a new group key out to all clients.
T im e r
Click
to exit this screen without saving any changes.
C a nc e l
Click
to save your changes.
O K
WX Series User's Guide
to add security on this wireless network. The wireless clients
to allow any client to associate this network without any data
for more details about this field.
or
to add security on this wireless network. The
WPA3- SAE/ WPA2- PSK
to allow any client to associate this network without
No Se c urity
, you can manually type a pre-shared key
based on the device(s) MAC address.
(De ny)
100
or
(Allo w)
Ne two rk
Advertisement
Table of Contents
