Table of Contents
Advertisement
Each field is described in the following table.
Table 16 WiFi Settings: Configuration
L ABEL
WiFi
2.4G/5G WiFi
WiFi Name
WiFi Password
Random Password
Hide WiFi Name
Save
6.4 L AN Se tting s
Use this screen to view the LAN IP address and subnet mask of your WX Device.
LAN
Fig ure 41
Click the Arrow icon (
and subnet mask for your WX Device.
Chapter 6 Connection Status
DESC RIPT IO N
Click this switch to enable or disable the 2.4G and/or 5G wireless networks. When the switch
goes to the right
, the function is enabled. Otherwise, it is not.
The SSID (Service Set IDentity) identifies the service set with which a wireless device is
associated. Wireless devices associating to the access point (AP) must have the same SSID.
Enter a descriptive name (up to 32 English keyboard characters) for WiFi.
If you selected
Ra ndo m Pa sswo rd
Device.
If you did not select
Ra ndo m Pa sswo rd
case-sensitive keyboard characters.
Click the Eye icon to show or hide the password of your wireless network. When the Eye icon
is slashed
, you'll see the password in plain text. Otherwise, it is hidden.
Select this option to have the WX Device automatically generate a password. The
field will not be configurable when you select this option.
Pa sswo rd
Select this check box to hide the SSID in the outgoing beacon frame so a station cannot
obtain the SSID through scanning using a site survey tool.
Note: Disable WPS in the
Click
to save your changes.
Sa ve
) to open the following screen. Use this screen to configure the LAN IP address
WX Series User's Guide
90
, this field displays a pre-shared key generated by the WX
, you can manually type a pre-shared key from 8 to 64
>
Ne two rk Se tting
Wire le ss
WiFi
>
screen to hide the SSID.
WPS
Advertisement
Table of Contents
