Table of Contents
Advertisement
Network Setting > Wireless > WMM
Fig ure 51
Note:
WMM
The following table describes the labels in this screen.
Table 26 Network Setting > Wireless > WMM
L ABEL
WMM of SSID1~4 Select
WMM
Automatic
Power Save
Delivery (APSD)
Cancel
Apply
7.7 O the rs Se tting s
Use this screen to configure advanced wireless settings, such as additional security settings, power
saving, and data transmission settings. Click
shown.
See
Section 7.11.2 on page 113
Chapter 7 Wireless
cannot be disabled if 802.11 mode includes 802.11n or 802.11ac.
DESC RIPT IO N
to have the WX Device automatically give the wireless network (SSIDx) a priority level
O n
according to the ToS value in the IP header of packets it sends. WMM QoS (WiFi MultiMedia
Quality of Service) gives high priority to voice and video, which makes them run more smoothly.
If the
in
802.11 Mo de
Ne two rk Se tting > Wire le ss > O the rs
WMM cannot be disabled.
Select this option to extend the battery life of your mobile devices (especially useful for small
devices that are running multimedia applications). The WX Device goes to sleep mode to save
power when it is not transmitting data. The AP buffers the packets sent to the WX Device until the
WX Device "wakes up". The WX Device wakes up periodically to check for incoming data.
Note: This works only if the wireless device to which the WX Device is connected also
supports this feature.
APSD only affects SSID1. For SSID2~4, APSD is always enabled.
Click
to restore the default or previously saved settings.
C a nc e l
Click
to save your changes.
Apply
for detailed definitions of the terms listed in this screen.
WX Series User's Guide
Ne two rk Se tting > Wire le ss > O the rs
105
is set to include 802.11n or 802.11ac,
. The screen appears as
Advertisement
Table of Contents
