Setting Up A Wifi Network Using Wps - ZyXEL Communications WX3401-B0 User Manual

Thomas can now use the WPS feature to establish a WiFi connection between his notebook and the WX
3
Device (see
Device (see
5.2.2 Se tting Up a WiFi Ne two rk Using WPS
This section gives you an example of how to set up a WiFi network using WPS. This example uses the WX
Device as the AP and a WPS-enabled Android smartphone as the WiFi client.
There are two WPS methods for creating a secure connection. This tutorial shows you how to do both.
•
Push Butto n C o nfig ura tio n (PBC )
easier method.
•
PIN C o nfig ura tio n
Identification Number) in the WX Device's interface. This is the more secure method, since one device
can authenticate the other.
Note: When using WPS in the Web Configurator, and depending on your
or
G Hz
Push Butto n C o nfig ura tio n (PBC )
Make sure that your WX Device is turned on and your notebook is within the cover range of the WiFi
1
signal.
Push and hold the
2
you may log into the WX Device's Web Configurator and go to the
screen. Enable the WPS function for method 1 and click
Chapter 5 Web Tutorials
Section 5.2.2 on page 73). He can also use the notebook's WiFi client to search for the WX
Section 5.2.4 on page 74).
- create a secure WiFi network simply by pressing a button. This is the
- create a secure WiFi network simply by entering a WiFi client's PIN (Personal
), the secure connection will apply for the selected
5 G Hz
button located on the WX Device's front panel for one second. Alternatively,
WPS
WX Series User's Guide
Ne two rk Se tting > Wire le ss > WPS
. Then click the
Apply
73
selection (
Ba nd 2.4
only.
Ba nd
button.
WPS