Advertisement
Wiring Diagrams
6
Product
1-Black
2-Red
ACCESS CONTROL DEVICES: SE LP10 Mortise, ElectroLynx wire Color / Function assignments
12VDC
(Reader)
SARGENT -
NEG
POS
SE LP10
Mortise
*Diagrams on following pages
If your lock is configured with End of Line Resistors, reference instruction sheet A8191 for the wiring of
RX & DPS outputs.
Default Operation Mode:
•
Red LED 'ON' when powered.
•
Presenting a 13.56MHz or 125 kHz credential causes LED to briefly turn green and then return to
red state.
•
Presenting a FIPS 201 PIV credential causes LED to turn amber as credential is authenticated.
Reader emits a short beep when credential is successfully read. Reference Diagram #1.
Optional TAMPER Operation Mode:
•
Connect Yellow TAMPER wire from ElectroLynx cable to desired EAC panel control line.
Reference Diagram #1.
•
As appropriate, use the configuration card to activate desired mode on reader.
PIN 8 (Yellow – TAMPER)
PIN 6 (Blue – RX COM)
PIN 4 (Green – Data 0)
PIN 2 (Red – Reader POS)
PIN 1 (Black – Reader NEG)
PIN 3 (White – Data 1)
PIN 5 (Orange – RX NO)
PIN 7 (Brown - EGND)
Optional Alternate Indicator Mode:
•
Connect GREEN_LED input to switch controlled by panel. Shorting GREEN_LED to READER_NEG
(Black) with panel switch will override reader LED to keep it green.
PIN 8 (Yellow – Green LED)
PIN 6 (Blue – RX COM)
PIN 4 (Green – Data 0)
PIN 2 (Red – Reader POS)
PIN 1 (Black – Reader NEG)
PIN 3 (White – Data 1)
PIN 5 (Orange – RX NO)
PIN 7 (Brown - EGND)
8 PIN CONNECTOR
3-White
4-Green
5-Orange
WIEGAND
WIEGAND
RX
DATA_1
DATA_0
NO
PIN 4 (Tan –DPS COM )
PIN 2 (Gray – Lock POS)
PIN 1 (Violet – Lock NEG)
PIN 3 (Pink – DPS NC)
PIN 4 (Tan –DPS COM )
PIN 2 (Gray – Lock POS)
PIN 1 (Violet – Lock NEG)
PIN 3 (Pink – DPS NC)
8
6-Blue
7-Brown
8-Yellow
1-Violet
RX
EGND
TAMPER
GREEN_LED*
COM
EGND
OPEN
COLLECTOR
INPUT
A8113H • 800-810-WIRE (9473) • www.sargentlock.com
SE LP10 Mortise Lock
4 PIN CONNECTOR
2-Gray
3-Pink
4-Tan
12/24 VDC
DPS
DPS
(LOCK RELAY)
NEG
POS
NC
COM
Note: NC= Normally Closed
NO= Normally Open
Advertisement
