Assa Abloy Sargent SE LP10 Installation Instructions Manual page 19

SE LP10 Mortise Lock
13 Install Inside Rose and Inside Lever Assembly
A. Rotate the inside rose first counter clockwise
to seat the threads then clockwise to
securely tighten.
B. Slide lever handle onto spindle until fully
seated. Be sure handle is horizontal and
facing the hinge side of the door. Push lever
onto spindle so minimum gap is visible.
C. Tighten the set screw securely with
a 1/8" hex wrench.
D. Before closing the door, test that the
lever is functional and ensure
smooth operation of the
latchbolt and deadbolt.
14 Attach Front Plate
Attach front plate with (2) 8-32x1/4" flat head screws and tighten securely.
A8113H • 800-810-WIRE (9473) • www.sargentlock.com
Fig. 13A
Outside of Door
Fig. 14
Inside of Door
Spindle
Rose
Set Screw
Inside Lever
(2) 8-32x1/4"
Flat Head Screws
19
Fig. 13B