Summary of Contents for Assa Abloy SARGENT 8200 Series
Page 1
Installation Instructions 8200 Series Mortise Locks with Standard Levers Motorized Electric Latch Retraction (56-) Tools Required • #2 and #3 Phillips screwdrivers • Flat blade screwdriver • 1/8" Allen wrench Product Components Part No.* Description Req. Varies Inside lever handle or knob – consult factory Trim components will vary by function number.
8200 Series Mortise Locks with Standard Levers Motorized Electric Latch Retraction (56-) Installation Instructions How To Change Hand of Lock Note: Red surface of locking piece must face secure (keyed/locked) side of door. To rotate locking piece: 1. Position lockbody with red surface of locking piece visible.
Page 3
8200 Series Mortise Locks with Standard Levers Motorized Electric Latch Retraction (56-) Installation Instructions Sectional / Rose Trim Note: Slide cylinder (A) through spring (B) and collar (C) (or escutcheon). Thread into lock until cylinder face is flush with collar (C) (or escutcheon) edge. Key slightly pulled out of cylinder will help thread cylinder. Note: SARGENT logo must be horizontal and on top portion of cylinder.
Page 4
8200 Series Mortise Locks with Standard Levers Motorized Electric Latch Retraction (56-) Installation Instructions TE, CE, and LE1 Escutcheon Trim Through-bolt inside escutcheon to outside escutcheon with two (2) #8-32 x 1-7/8" screws (I). Note: Screw heads must be visible on inside escutcheon. Cylinder Collar(s) –...
Page 5
8200 Series Mortise Locks with Standard Levers Motorized Electric Latch Retraction (56-) Installation Instructions WT Escutcheon Trim Cylinder Collar(s) – Inside and outside escutcheons are surface required for functions with applied using eight (8) #6 x 3/4" wood screws two (2) cylinders and or eight (8) #6-32 x 3/4"...
Page 6
8200 Series Mortise Locks with Standard Levers Motorized Electric Latch Retraction (56-) Installation Instructions Lock Schematic Check polarity. Verify + (red) wire. For assistance, call 800-810-WIRE. Green Ground Red + Black - White RX Common (with RX option only) Orange RX Normally Open (with RX option only) Electrical Specifi...
Page 7
8200 Series Mortise Locks with Standard Levers Motorized Electric Latch Retraction (56-) Installation Instructions Wiring Diagram - Simple Latch Retraction Outside External Inside External Input i.e. Wave Input i.e. Wave to to Open Switch, Open Switch, Motion Sensor, Motion Sensor, Push Button Push Button 56-8200...
Page 8
Wiring Diagram - Restroom Privacy Outside Inside External External Input i.e. Input i.e. Wave to Wave to Open Switch, Open Switch, Motion Motion Sensor, Sensor, Push Button Push Button 56-8200 Operation: Activating inside or outside external input will retract latchbolt and door operator will open the door, unless outside external input is disabled by lock button.